Com624p Manual Read/Download for eccentric loads, and the present design manual generally follows the same With LPILE (previously COM624P), determining the point of fixity seems to be. Tutorial user manual ensoft lpile. Lpile is a special-purpose program based on a pile under lateral loading using the p-y method. COM624P was a good.
LPILE is a special-purpose program based on rational procedures for analyzing a pile under lateral loading using the p-y method. LPILE solves the differential equation for a beam-column using nonlinear lateral load-transfer (p-y) curves. The program computes deflection, bending moment, shear force and soil response over the length of the pile.
Components of the stiffness matrix at the pile head may be computed internally by LPILE so users can incorporate basic soil-structure interaction in their super-structure analyses. LPILE also provides graphs of pile-head deflections for various pile lengths, to help users with optimum pile penetrations (for lateral response). Push-over and buckling analyses may also be optionally performed by LPILE.
Nonlinear lateral load-transfer from the foundation to the soil is modeled using p-y curves generated internally using published recommendations for various types of soils. Special procedures are programmed for computing p-y curves for layered soils and for rocks. Alternatively, the user can enter manually any other externally generated p-y curves.
Five types of pile-head boundary conditions may be selected, and the structural properties of the pile can vary as a function of depth. LPILE has analytical features to compute the nonlinear moment-curvature relationships and nominal moment capacity of a pile’s section based on specified pile dimensions and nonlinear material properties. Optionally, the user may enter nonlinear moment-curvature relationships to be used in place of the internally-generated values. LPILE provides several design recommendations for rebar arrangements in drilled shafts.
* The demo version is actually the full program but will not allow users to save or run new data models. However, various previously-run example files are installed with the demo version. Users can open each example file to look at the type of input data parameters used in various applications and also observe corresponding output graphics and text files that were produced by the program for each model.
* LPILE download link provides demo version of the software.
The FB-Deep computer program is a Windows based program used to estimate the static axial capacity of drilled shafts and driven piles.
SHAFT is a computer program used to evaluate the axial capacity and the short-term, load-settlement curves of drilled shafts or bored piles in various types of soils.
APILE is used to compute the axial capacity, as a function of depth, of a driven pile in clay, sand, or mixed-soil profiles.
PileLAT is a finite-element based program that analyzes the behaviour of single piles mainly under lateral loading based on p-y curves.
TZPILE implements the well-known method of soil-structure interaction, commonly called the t-z method, where t-z and Q-w curves are used respectively for load transfers in side resistance and end bearing.
Calculates bending moments and shear forces for loads on a single span or continuous multi-span beam using the moment distribution method.
No comments yet. Be the first to comment.
Submit a review using your Facebook ID
As an option, components of the stiffness matrix at the pile head may be computed internally by LPILE so users can incorporate basic soil-structure interaction in their super-structure analyses. Another option from LPILE provides graphs of pile-head deflections for various pile lengths, to help users with optimum pile penetrations (for lateral response).
Nonlinear lateral load-transfer from the foundation to the soil is modeled using p-y curves generated internally using published recommendations for various types of soils. Special procedures are programmed for computing p-y curves for layered soils and for rocks. Alternatively, the user can enter manually any other externally generated ip-y curves.
Five types of pile-head boundary conditions may be selected, and the structural properties of the pile can vary as a function of depth. LPILE has analytical features to compute the nonlinear moment-curvature relationships and nominal moment capacity of a pile’s section based on specified pile dimensions and nonlinear material properties. Optionally, the user may enter nonlinear moment-curvature relationships to be used in place of the internally-generated values. LPILE provides several design recommendations for rebar arrangements in drilled shafts.
LPILE has been written as a 32-bit application that uses 64-bit precision in computations. The program produces plain-text input files and output reports. A number of graphs can be generated by the program and be saved in several graphics formats for inclusion in project reports. LPILE runs under all versions of Microsoft Windows© from Windows XP through Windows 7 (32 and 64 bit versions).
Lpile Technical Manual
DownloadLpile Technical Manual 2018
http://www.4shared.com/rar/rpsMb2ZAce/LPILE_637__1_.html?
LPILE 2012 User Manual
http://www.4shared.com/office/uPOdnr7nce/LP2012_Technical_Manual.html?